Air conditioning systems are some of the most valuable machines to have functioned in your homes especially during the hot summer seasons. You don’t want to be caught off-guard with a faulty AC system when the temperatures are soaring. You may think you have an AC system that is functioning smoothly only to realize that everything is going wrong at the absolute wrong time. Here are some of the AC problems you need to look into and the steps you can take to prevent them before they cost you more money than you are willing to use in air conditioning repair Oshawa.
1. Low refrigerant
This is the stuff which your AC uses to remove all the humidity and heat from the air in your business or home. If there is any leak in the refrigerant lines, you may end up with an AC system which doesn’t effectively cool the air in your homes or business place. Unfortunately, you can’t just perform this kind of task on your own. You need to hire a technician who will look for the leak in the system and repair it. this can sometimes consume a lot of time and is usually quite expensive especially if you have multiple leaks in your system.
2. Frozen evaporator coils
The AC evaporator coil is usually filled with refrigerant which is responsible for absorbing all the humidity and heat in the air like a sponge. These coils need warm air constantly circulating them for them to work efficiently. If something happens and the air around them gets cold, then they can freeze up and interfere with the whole system functionality.
3. Dirty condenser coils
Your AC system condenser coils work to get rid of all the excess heat that has been removed from the air inside your home or office and expels it outside your building. These AC parts don’t function optimally if there is a layer of dirt covering their endings. This is very common especially with soot which ends up covering these coils. Heat transfer is inhibited making it harder for the AC to do its job.
4. Fan problems
Your Ac fan is what blows indoor air over your AC unit’s evaporator coil so as to cool it. then there is another fan which blows air on the outdoor unit’s condenser which expels all the absorbed heat outside your building. If any of these fans fail to function properly, then you will have a major problem. The fans can fail to function due to a number of reasons like too much dirt or debris on the belts, or worn out or broken belts, etc.
5. Leaking ducts
AC systems have ducts that run through your entire house walls and ceilings and carry cooled air from the AC throughout your building. However, if there are any holes or breakages in the ducts, then excessive cooled air can wind up in your walls where it will not be doing you any good and will also force your AC to work even harder and drive your energy costs higher.
6. Thermostat problems
This is very common with the old dial-type thermostats which could, either be incorrectly calibrated or just too old to keep functioning optimally. This issue is pretty easy to fix, you simply need to replace and recalibrate the AC thermostat and everything will be back to normal.
7. Clogged Drains
All the moisture that’s collected by your AC has to go somewhere, and the drain line is where they will be removed from. If you have a clogged drain line, this moisture and water can sometimes back up and end up damaging your AC system. Look for any signs of water seepage or leakage on your walls and on the AC system and ensure to address any clogged drains you find immediately.
